Nach oben

  1. Informationen zum

  2. Artikelnummer: U-INSTALLER

    Ubiquiti Networks U-Installer - airMAX® CPE Installation Tool

    Bitte melden Sie sich an oder registrieren Sie sich im Shop um die Preisanzeige und die Bestellfunktion im Shop freizuschalten. Weitere Informationen zur Anmeldung und Freischaltung finden Sie hier.
    Gewicht: 0.25 Kg
    Verfügbarkeit: im Zulauf
    Artikelblatt drucken

    Ubiquiti Networks U-Installer - airMAX® CPE Installation Tool

    The durable Ubiquiti® Installer should be in every WISP installer’s toolbox. The U-Installer makes installing airMAX® Customer Premise Equipment (CPE) devices easier and more efficient. Position, provision, and configure the CPE device at the point of installation using a tablet or smartphone.

    Mobile Device-Friendly Installation
    The U-Installer provides Wi-Fi connectivity to the CPE management interface during installation, so provisioning and final adjustments can be made with a tablet or smartphone.

    The U-Installer also provides 24 V PoE to the CPE, making installation easier. The Wi-Fi functionality allows the U-Installer to be used with devices that don’t support 24 V PoE.

    Accessing airOS via Wi-Fi
    The U-Installer gives you the ability to configure your CPE device through its Wi-Fi management radio and the U Mobile app. Broadcasting its own SSID, the U-Installer allows mobile devices to connect wirelessly to the same network as your CPE device. This simplifies both device discovery and configuration.

    The U Mobile app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). U Mobile allows you to set up, configure, and manage your CPE devices.

    Hardware Overview
    The U-Installer’s hardware features make configuring and provisioning your CPE fast and efficient.

    Powers CPE via PoE
    The U-Installer’s PoE out port conveniently supplies 24 V passive PoE to the CPE device.

    Durable Rubber Casing
    The removable rubber casing protects the U-Installer during installation.

    External PoE Reset
    Quickly reset the device connected to the U-Installer to factory defaults.

    Rubber Case Clip
    Use the clip on the back of the rubber casing to secure the U-Installer to a belt or pocket.

    Built-in Battery
    The internal battery provides up to one hour of runtime. Check the four blue LEDs on your U-Installer to verify the internal battery’s charge level.

    Rechargeable via USB
    With a USB Type-C connector, the U-Installer can be charged on the go using a mobile battery pack, simplifying installation.


    • Dimensions: 93 x 57 x 38.2 mm (3.66 x 2.24 x 1.50")
    • Processor: Atheros MIPS 74KC, 560 MHz
    • Memory: 64 MB DDR2
    • Buttons:
      • (1) Reset U-Installer
      • (1) Reset external airMAX device
      • (1) Power on/off
    • Networking interfaces:
      • (1) 10/100 Ethernet port
      • Wi-Fi
    • Ports: (1) USB-C port
    • Passive PoE output:
      • Voltage: 24 V
      • Max. Power: 12 W
    • Management interface: Wi-Fi
    • Wi-Fi frequency: 2.4 GHz
    • Wi-Fi standards: 802.11b/g/n
    • Power method:
      • Internal battery
      • USB mobile battery pack: 5 V, 3 A (not included)
    • Power supply: 5 V, 3 A
    • Supported voltage range: 4.95 - 5.05 V
    • Max. power consumption
      • U-Installer: 3 W
      • U-Installer with CPE: 15 W
    • LEDs
      • (1) Wi-Fi
      • (4) Battery
    • ESD/EMP protection: 24 kV contact/air
    • Operating temperature: 0°C to 35°C (32°F to 95°F)
    • Operating humidity: 5 to 95% non-condensing
    • Certifications: CE, FCC, IC